This roll is so versatile; place it on your saddle by looping the webbing in your saddle rails, tuck it in your jersey pocket, or toss it in your bag!
Just mount the roll with all of the essentials: Tube, Multi-Tool, Tire Lever (holds up to two), CO2 Charger and Cap.
Accommodates road tube (650c/b – 700c x 18mm – 28mm) and MTB tube (26″ – 29″ x 2.5″)
- 1. Squeeze the air out of that tube and roll it tight! Make sure you do not damage the tube with the valve stem as they tend to be sharp!
2. Simply load your tube and tools and place it in the center pocket & secure the flap down with the snap.
3. Tighten the buckle strap around the roll. Tighten the strap as much as possible (be sure to use the adjuster tri-glide to secure the excess webbing). Buckle the Tool Roll closed off the bike.
4. Disengage the buckle and string it through the saddle rails. Feed the male buckle through the left saddle rail and the female buckle through the right saddle rail. Wrap the straps around the Tool Roll and buckle together. You will find that the webbing may be tight and the buckle may be difficult to install but not to worry, that is all part of the process.
5.Double check that the buckle is securely closed. Buckle may appear to be closed with a single click; but if there’s an 1/8 inch space at the closing points of the buckles, it is not securely closed. Make sure the closing points of the buckles are completely touching. Double check the buckle before riding.
If installed correctly there would be no sway or sag of the roll. It should be tight up against the saddle rails and the contents should be secured.
**DISCLAIMER** By purchasing our Tool/Saddle Roll you agree to the following: We can not and will not be held liable for any and all loss associated with your personal items placed into our Tool/Saddle Roll and including the Tool/Saddle Roll itself. By purchasing the Tool/Saddle Roll, it is in your best interest to fully inform yourself on our installation guide as well as to watch our 2 minute video on installing the Tool/Saddle Roll. It is up to you, the customer, to correctly install the Tool/Saddle Roll and use it in the manner to which it was designed. You are in control of your own destiny! Follow the installation guide and watch our install video.
Made in Los Angeles, the roll attaches to your saddle using a quick release buckle so it’s easy to put on and take off your bike.
There are several different colours available – all made from Cordura.